Should I learn how to drive 1

Learning to start the car properly: The first steps in driving school

In a nutshell: starting off by car

Who often has problems starting off?

Getting started is usually one of the biggest problems for Learner driver daring who are behind the wheel for the first time.

How do you start correctly?

You have toLet the clutch come and theGrinding point find thento give gas and theTake your foot off the clutch.

What happens when drivers make mistakes when starting off?

Will this processincorrect executed,choke Learner drivers often use theEngine off.

Starting off with the car

They are probably for every motorist first driving lessons still in memory. Got into the vehicle full of vigor and then didn't even move because of it Motor constantly drowned is. Around Drive to learn, is this Start up the first step.

Mind you, of course, in practice. You have to go through the Theory lesson the basics for understanding the Road traffic regulations (StVO). Then finally it stands first driving lesson on, the excitement is great.

However, this is usually unspectacular. Only the Functions of the vehicle explained and with a little luck it can do that Practiced starting become. What do prospective drivers license holders have to consider? And which Problems can occur? Our guide will provide you with detailed information on the subject of "starting up".

How do I start correctly? An instruction

To be with a Start the petrol engine correctly being able to is above all feeling asked. The coupling represents the most important part of the start-up process. In the following you will receive a manual, So that Start-up succeeds:

  • Step through the clutch, find the grinding point: First you have to fully depress the clutch and engage first gear. Find the grinding point and hold the clutch in this position, the car will then begin to roll very easily.
  • to give gas: Once the grinding point has been reached, you can start to accelerate a little. Make sure that the tachometer is between 1,000 and a maximum of 2,000 rpm. If you accelerate too much, this will damage the clutch discs.
  • Release the clutch: To stop moving off, you must release the clutch as soon as the vehicle is in motion and you accelerate. Then you can shift into second gear as usual and actively participate in road traffic.

Always remember: no master has fallen from heaven yet. The correct approach is largely based on feeling and Empirical values. This will be yours Acquire over time. So don't despair if it doesn't work the first time. The driving instructor will be at your side and advise you on how to start off better in the future.

The clutch: an important tool for starting up

The coupling and its grinding point are the most important tools for a faultless start-up. But how exactly does a clutch work? The way it works is as follows:

At the engine finds the Power transmission on the bikes (to set the vehicle in motion) by a drive shaft instead of. The coupling can this separate. Drive If you are driving a car, you will be the Discs the clutch compressed.

For example, switch to a other gear, you need the Depress the clutchto separate the individual slices. The engine then continues to run by itself, but does not give any power to the wheels.

How do you behave when starting from the edge of the road?

The foundations for participating in road traffic are laid in theory. Starting off also plays an important role here. In the Theory test you can meet the following question: "How do you behave when starting from the edge of the road?" For this you will be three possible answers delivered:

  • A: Just look in the rearview mirror
  • B: Watch traffic behind you
  • C: blinking

Correct are the Answers B and C.. If you want to get into the flow of traffic from the edge of the lane, you have to do this before starting off flash and the Watch traffic. This is the only way to guarantee safe threading onto the road.

Starting with the handbrake: be careful on inclines

The Approaching an incline Here you have to especially careful be so your vehicle Not rolls back and possibly ramming other road users.

Starting off with the car can be based on this two different types respectively. On the one hand, you have the option of without handbrake to approach. To do this, you must first apply the brake so that you do not roll backwards.

At the same time, the Coupling led to the grinding point. If the car slowly begins to roll forward, you can switch from the brake to the accelerator pedal and accelerate accordingly so that the vehicle can get up the mountain.

The second variant represents that Starting with the handbrake If you find this out, you save yourself having to keep the brakes on. The approach then follows the same pattern as without the handbrake: you leave the Coupling to the grinding point come and step on the gas when this is reached.

When the vehicle starts moving, you can use the Release the parking brake and normal go on. When doing this, make sure that you give enough gas. A speed of about 3000 revolutions per minute can be achieved.

Which option you choose is up to you, that Starting on the mountain can be achieved with both variants. Over time, you will see what suits you better.

Car jerks when starting: Possible problems

Problems starting up there are many in the beginning. Until the learner driver knows the grinding point and develops a feeling of how much gas is necessary, one or the other driving lesson can be missed. Don't let this discourage you, this is one completely natural learning process.

But even after you finish driving school and pass your driver's license, problems can still arise. The The clutch slips when starting or the clutch stinks when starting - these are mostly Signs of wear and tear. In the following we present to you common problems and explain what this can usually be traced back to:

  • Start off with screeching tires: What some drivers celebrate as a particularly great start happens to some only by mistake: starting off with screeching tires. It happens when you accelerate too much.
  • The car goes out when pulling away: If you let the clutch come too quickly, you can stall the engine. Then just turn it back on and try your luck again.
  • Car jerks when starting: There could be various reasons for this, for example a weak battery. If the problem occurs more frequently, a visit to a workshop is probably necessary.
By the way: Starting off without gas is also to be given possible. However, it works only for vehicles with a diesel engine. In this case, you have to depress the clutch and engage first gear. Then let the clutch come on until you reach the grinding point. Hold this point until the vehicle has reached a basic speed of around 10 km / h. So you can drive off without accelerating. Starting off with a petrol engine, however, only works if you press the accelerator pedal.
(44 Ratings, average: 4,59 of 5)
Learning to start the car properly: The first steps in driving school
4.59544Loading ...

You might also be interested in: